Jean Buckner Hooks May 15th, 2019 - 13:26:43
The O'Shaughnessy style is deemed the best all-purpose type, and many variations are available. This style has a small eye turned perpendicular to the bend and point, and with the shank bent a little forward. Variations include the baitholder, with the small points at the shank to hold the soft bait; and snelled hooks with turned-in or -out eyes, sold with short leaders already tied. Weedless hooks are those with a short piece of wire from the eye to the point, to ward off weeds and other water debris from lodging in the hook bend or point. Weedless hooks are mostly used in fishing water with thick vegetation, either with bait or as flyhook. Many hooks can be rigged weedless, though.
O'SHAUGHNESSY This hook is named for the specific design of the hook. It's a standard hook, forged with a very strong bend. This hook is relatively thick, very strong, and not likely to bend out of shape. Generally designed for saltwater, it is good for general bottom fishing use. Sizes range from #3 to as large as 19/0.
While fish can obviously be caught and continue to be caught by using either of the methods of baiting a hook outlined above, the truth of the matter is that there is a better, more effective way. It involves using a second fishing hook and it is a method that I was taught for using a worm as bait many years ago by my fishing mentor. This man simply modified and downsized a rig that he had used while fishing in the ocean and created something he liked to call a set of gang hooks.
A set of gang hooks is just a pair of fishing hooks that are tied back to back, which enables a worm to be hooked once in the head then hooked I bit farther down the body with a second hook, which results in a much more natural and realistic presentation than either of the previously mentioned methods. There is no doubt that a set of gang hooks is the best way to with a worm. The fishing hooks that are used to make a set of gang hooks are generally much smaller than you might be used to (size #6, #8, or #10) and this is because you want the shank of the hook itself to be as concealed as possible to the fish that you are attempting to catch.
On the other hand, the flatted hooks have flat shank ends instead of eyes, the flat part to bar the snell knot from pulling out of the hook. Snelled flattened hooks are popular to light long-liner fishermen, but not to sportfishermen because the thin flattened end breaks rather easily. Also the flat end hurts one's finger when removing the hook from the fish.
I myself prefer the steel crochet hooks for a number of reasons. First of all, the sturdiest of hooks are the steel variety. For example, if you have a very tight stitch that you are trying to pull your next loop through, the plastic hooks will bend or even break whereas the steel hooks will do the job very nicely. Another advantage to the steel hooks (depending on the size you are using) is that if the hook does bend, you can easily bend that hook back into shape. As well, if someone (such as a grandson) decides to play with a crochet hook when your back is turned, they quickly seem to lose interest in a steel hook, whereas with a plastic hook, it could go in the toy box!