Lula Harrington Hooks May 15th, 2019 - 13:42:08
Depending on the type of fish you want to catch the size and strength will vary. For example, if you are fishing for smaller fish (Rudd, Roach, Perch and small Bream) then a smaller hook produced from fine wire would be the perfect choice. The sizes of these fishing hooks should be between 18-22. If you are targeting much larger and hard fighting fish you will want a much stronger and bigger hook. Most anglers tend to use them from sizes 12 - 4, depending on which type of fish they are targeting.
After I began to use the hook, I found out in short order that a quick, had jerk wasn't the ticket to hooking blues manually with circles. As soon as we started using a long sweep of the rod, we started hooking fish that weren't being very cooperative. Fish would move to the boat, away from the boat, along side the boat - every direction you could imagine and we were catching them just as good if not better once we learned good circle hook technique.
The O'Shaughnessy style is deemed the best all-purpose type, and many variations are available. This style has a small eye turned perpendicular to the bend and point, and with the shank bent a little forward. Variations include the baitholder, with the small points at the shank to hold the soft bait; and snelled hooks with turned-in or -out eyes, sold with short leaders already tied. Weedless hooks are those with a short piece of wire from the eye to the point, to ward off weeds and other water debris from lodging in the hook bend or point. Weedless hooks are mostly used in fishing water with thick vegetation, either with bait or as flyhook. Many hooks can be rigged weedless, though.
Hooks are hooks in most anglers' minds. They figure they either need a big one or a small one, depending on the fish they are pursuing. Lots of anglers go through life completely missing the importance of using not only the right size sea hook, but probably most importantly the right type of sea hook.
These hooks can be used in any type of fishing situation where a worm will be used as bait such as; drift fishing, fishing on the bottom, or while even suspending a worm under a float. The bottom line is that because a worm is thin and long the only way to hook a worm where that worm appears to the fish as it should in nature is to use a set of gang hooks. The second hook also tends to act as a safety net when the fish are biting the second half of the worm, rather than the top where the first hook is. In normal situations when a fish does this they steal you worm. But with a set of gang hooks these "short striking" fish get hooked. In any case if you want to know how to bait a hook with a worm, the answer is as simple as adding a second hook to the equation and using what my mentor referred to as a set of gang hooks.
First, use common sense. As simple as that may sound, I can't tell you the number of times I have seen people make some really bad hook choices. Match the hook size with the fish! Second, use some trial and error and learn from your mistakes. No one became a good fisherman overnight. All of us had to learn either from someone else or by trial and error. Thirdly, get a good brand of hook, such as Sakuma or Mustad. Try to avoid cheap hooks for the reason that they are just not up for the job, you don't want to let that fish of a life time get away because of a crap hook bend out on you! If you are going to spend any money on Terminal tackle you hooks should be the number one first choice.