Annie Hendrix Hooks May 13th, 2019 - 12:49:31
Multi-hooks. A tandem hook is a hook with a smaller no-eye one welded into it. It is used as stinger hook: attached to the main hook with a short leader, then the tandem's smaller hook is pushed into the tail part of the (usually live) bait to catch wary fishes that attack only the rear part of the bait.
First, use common sense. As simple as that may sound, I can't tell you the number of times I have seen people make some really bad hook choices. Match the hook size with the fish! Second, use some trial and error and learn from your mistakes. No one became a good fisherman overnight. All of us had to learn either from someone else or by trial and error. Thirdly, get a good brand of hook, such as Sakuma or Mustad. Try to avoid cheap hooks for the reason that they are just not up for the job, you don't want to let that fish of a life time get away because of a crap hook bend out on you! If you are going to spend any money on Terminal tackle you hooks should be the number one first choice.
In sea fishing in the UK, average range is from a Size 1 to a Size 10/0 been a boat hook. For example Mackerel fishing, you should be using a size 1/0 hook, for Pollack from the shore you could use a size 3/0 or 4/0 and also you can use this size for most bottom fishing needs. Flatfish you are better off using a size 1 or 1/0 due to their small mouths. Remember all of these hooks come in a short, regular, or long shank version. The shank of the hook is the part between the eye of the hook and the bend. For example long shanks are very well suited for Sandeel baits, Lug or Rag threaded up the shank for a more natural presentation.
These hooks can be used in any type of fishing situation where a worm will be used as bait such as; drift fishing, fishing on the bottom, or while even suspending a worm under a float. The bottom line is that because a worm is thin and long the only way to hook a worm where that worm appears to the fish as it should in nature is to use a set of gang hooks. The second hook also tends to act as a safety net when the fish are biting the second half of the worm, rather than the top where the first hook is. In normal situations when a fish does this they steal you worm. But with a set of gang hooks these "short striking" fish get hooked. In any case if you want to know how to bait a hook with a worm, the answer is as simple as adding a second hook to the equation and using what my mentor referred to as a set of gang hooks.
Of a unique style is the offset hooks, which have points bent either left or right (kirbed or reversed). The offset point is believed to hook faster and surer, since the point will bite any way the hook is mouthed by the fish.
Finally, to all of you who are new to fishing, try taking these examples and build your learning experiences upon them. Trial and error are often the best teachers in any skill.