Annie Hendrix Hooks May 11th, 2019 - 12:54:48
O'SHAUGHNESSY This hook is named for the specific design of the hook. It's a standard hook, forged with a very strong bend. This hook is relatively thick, very strong, and not likely to bend out of shape. Generally designed for saltwater, it is good for general bottom fishing use. Sizes range from #3 to as large as 19/0.
The "upturned beak" hooks have a little something in common with circle hooks that is worth mentioning here. Aside from the positive hooking mortality benefits that have made circle hooks so popular, they were also designed to pretty much work on their own in finding a soft spot to sink into, thus making hook setting not only unnecessary, but, counterproductive.
Depending on the type of fish you want to catch the size and strength will vary. For example, if you are fishing for smaller fish (Rudd, Roach, Perch and small Bream) then a smaller hook produced from fine wire would be the perfect choice. The sizes of these fishing hooks should be between 18-22. If you are targeting much larger and hard fighting fish you will want a much stronger and bigger hook. Most anglers tend to use them from sizes 12 - 4, depending on which type of fish they are targeting.
As a consequence, if the fish has taken the bait past the bony elements of the outer mouth, there is a high probability of the hook catching and setting in soft tissue deep within the fish's gut or even in or close to vital organs.In the case of circle hooks however, instead of "setting" the hook by jerking the rod, the angler must apply steady pressure to the line, bringing it in slowly but steadily. If the angler jerks the rod to set the hook, the hook will often pull out of the fish's mouth and the angler will lose the fish. This is a technique that is somewhat counter-intuitive, and when faced with the thrill of a large billfish at close quarters is often easy to forget in the heat of the moment!
The basic problem with baiting a hook with a worm is that a worms body is thin and long and a fishing hook in much smaller and shorter than the length of a worms body. This means that one of two things will happen when a fishing hook is baited with a worm; either the worm is hooked over and over again (thus creating what I refer to as a worm ball) or an attempt is made at threading the worm onto a fishing hook in an attempt to make the worm appear more lifelike. These are the two ways that fishermen have been baiting their hook with a worm since some guy who wanted to catch a fish found a live worm under a log and said to themselves, "Maybe those fish will eat this thing".
First, use common sense. As simple as that may sound, I can't tell you the number of times I have seen people make some really bad hook choices. Match the hook size with the fish! Second, use some trial and error and learn from your mistakes. No one became a good fisherman overnight. All of us had to learn either from someone else or by trial and error. Thirdly, get a good brand of hook, such as Sakuma or Mustad. Try to avoid cheap hooks for the reason that they are just not up for the job, you don't want to let that fish of a life time get away because of a crap hook bend out on you! If you are going to spend any money on Terminal tackle you hooks should be the number one first choice.